Hot Tub Instructions

Watch the video and read the instructions below on how to take off the hot tub cover and how to use the hot tub at The Isabella Oasis 🌴

Hot Tub Cover (0:00-0:32 - End Of Video)

Step 1. Lift up the cover manually from the corner of the right side or the middle till it folds back in half (MAKE SURE YOU DO NOT ADJUST THE BAR).

Step 2. Once the cover is lifted up and is in the half position, lift the bar up from the side.

Step 3. Once the bar is lifted up the cover will be in a upright position but stays on the tub for easy placement back on the tub and to keep the debris off the cover.

Step 4. To place the cover back on the tub just lift the bar from its side back down (the cover will be back in the half position)

Step 5. From the half position bring the front of the cover back to its original position.

NOTE: Always keep the hot tub cover on when not in use. This keep the debris out and keep the tub warm for your next use.

Hot Tub Use (0:32-End Of Video)

Step 1. Once the cover is lifted you will see a panel.

Step 2. Push menu to see the temperature of the water.

Step 3. To increase or lower the temperature push the up or down arrow. Once you adjust the temperature push the return button to maintain the temperature you selected. It takes a little time for the temperature to reach your desired setting.

Step 4. To turn on the jets push the jet button. Push once for the low setting. Push twice for the high setting.

NOTE: The Jets stays on for 15 min and will turn off automatically. If you would like for it to continue you have to push the jet button again. The hot tub stays on 24/7 to filter the water.